Husqvarna RZ3016 Operator's Manual page 34

Maintenance
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
Replace the engine oil filter
Clean/replace the spark plugs
Check the caster wheels (every 200 hours)
Check/adjust the mower deck
Check the engine valve clearance
Perform the 300-hour service
Lubricate according to Lubrication Schedule
First change after 5-8 hours. When operating with a heavy
1)
load or at high ambient temperatures, replace every 50
hours.
In dusty conditions, cleaning and replacement are required
2)
more often.
For daily use, the machine should be lubricated twice weekly.
3)
Performed by authorized service workshop.
4)
●
= Described in this manual
♦
= Not described in this manual
■
= See engine manufacturers' Owners Manual
WARNING!
Before performing any service or adjustment checklist:
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to OFF position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
34
MAINTENANCE
1)
4)
4)
3,4)
Daily Weekly
Before After
At Maintenance interval in
least hours
once
each
year
25 50 100
●
● ●
■ ■
■ ■
■ ■
●
●
♦
♦
● ● ● ●
300
●
♦
♦
●