Husqvarna AUTOMOWER 265 ACX Operation Manual page 35

3. If you intend to install guide 1:
• Insert the end of guide 1 into the lower
right-hand hole on the charging station and
catch it in the upper hole.
• Secure a connector on the guide wire.
• Connect guide 1 to the contact pin on the
charging station marked guide 1.
•
If you intend to install guide 2:
• Insert the end of guide 2 into the lower
left-hand hole on the charging station and
catch it in the upper hole.
• Secure a connector on the guide wire.
• Connect guide 2 to the contact pin on the
charging station marked guide 2.
4. Route the cable straight under the charging
station plate.
5. Route the guide wire at least 7 ft (2 metres)
straight out from the front edge of the charging
plate.
3. INSTALLATION
Guide 2
Guide 2
Guide 1
Maximum
distance
At least 16"
Guide 1
At least
7 ft
English - 35