Turning The Unit Off; Tuner; Listening To The Radio; Storing And Recalling Broadcast Frequencies - Pioneer DEH-3910MP Operation Manual

Operating this unit

Turning the unit off

% Press SOURCE and hold until the unit
turns off.

Tuner

Listening to the radio

1 Press SOURCE to select the tuner.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1, F2, F3 for FM or MW/LW.
! The FM bands cover different frequency
ranges as below:
F1: 65 MHz to 74 MHz
F2, F3: 87.5 MHz to 108 MHz
3 To perform manual tuning, briefly press
c or d.
4 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
% When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
# Up to 18 FM stations, six for each of the three
FM bands, and six MW/LW stations can be stored
in memory.
# Press a or b to recall radio station frequen-
cies.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
% Press LOCAL/BSM repeatedly to turn
local seek tuning on or off.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 1 to 6.
Once stored you can tune in to those frequen-
cies with the touch of button.
! Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 1 to 6.
% Press LOCAL/BSM and hold until the
BSM turns on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
# To cancel the storage process, press
LOCAL/BSM.

Built-in Player

Playing a disc

1 Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
Section
02
7
En