Energy Saving; Door Alarm - Sharp SJ-GC584R Operation Manual

Energy Saving

Use this feature when you want to switch the appliance to energy-saving operation.
To start operation
1
Press the select key and select Energy saving icon.
2
Press the key. [
3
Press the key.

Door Alarm

• At first, door alarm is set "ON".
• When the refrigerator or freezer door is left open, the door alarm will sound.
• The door alarm will sound in 1 minute after opening the door and again after 1 minute (once in each case).
• If the door is left open for approx. 3 minutes, the alarm will sound continuously.
To cancel operation
1
Press the select key and select the door alarm
indication like the below figure.
2
Press the key.
3
Press the key.
6
Flashing
: ON, : OFF ]
Flashing
Door alarm indication
[ : ON, : OFF ]
To cancel operation
It is the same method as starting operation.
Press the key in step 2.
NOTE
• While this feature is operating, the inside temperature of the
refrigerator and freezer compartment will be higher than the
preset temperature as follows ; R: about 1°C, F: about 2°C.
(If the preset temperature is set at R: 3°C, F: -18°C.)
The displayed temperature will not be changed.
• The efficiency of power saving depends on the usage
environment (controlling temperature, ambient temperature,
frequency of opening or closing the door, amount of food).
• Cancel this feature when you feel the beverages are not
cooled enough or ice making takes time.
To start operation
It is the same method as canceling operation.
Press the key in step 2.