Table of Contents
Advertisement
Listening to a CD or MP3/WMA disc (continued)
■ Procedure to playback CD or MP3/WMA
disc with folder mode off
1
Select the CD function, and load a CD or an MP3/WMA
disc. After disc is loaded, disc info will be displayed.
2
Select desired file to be played back by pressing the
or
button.
3
Press the
/ button. Playback will start.
●
Title, Artist and Album name are displayed if they are
recorded on the disc.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Note:
If the track is skipped during playback, it means "Copyright
protected WMA file" or "Not supported playback file" is
selected.
■ Procedure to playback MP3/WMA disc with
folder mode on
To play back CD-R/RW.
1
Select the CD function, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed. Press the
FOLDER button.
TOTAL
indicator
2
Press the PRESET (
playback folder. (Folder mode on)
Folder number
3
Select desired file to be played back by pressing the
or
button.
4
Press the
/ button. Playback will start.
●
Folder name, File name, Title, Artist and Album
name are displayed if they are recorded on the disc.
●
Press the PRESET (
can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
selected folder.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Folder name display
Counter display
Album display
Total number of files
or
) button, to select desired
Total files in Folder 3
or
) button, and the folder
File name display
Title display
Artist display
■ Programmed play (CD or MP3/WMA with
folder mode off)
You can choose up to 32 selections for playback in the
order you like.
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2
Press the
or
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the (CLEAR)/DISP button.
5
Press the
/ button to start playback.
6
Press the
button. The total number in memory will
appear.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit,
press again the
"MEMORY"
indicator
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the
"MEMORY" indicator will be displayed. Follow steps 1 - 4
to add tracks. The new tracks will be stored after the last
track of the previous programme.
E-6
button to select the desired track.
Selected track number
button on the remote control. The
will
disappear
and
all
the
Advertisement
Table of Contents
