Table of Contents
Advertisement
Troubleshooting chart (continued)
■ USB
Symptom
●
●
Device cannot be
detected.
●
●
●
●
●
Playback does not
start.
●
●
●
Wrong time
display.
●
●
Wrong file name
display.
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■ If problem occurs
When this product is subjected to strong external
interference
(mechanical
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on
again.
2
If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■ Factory reset, clearing all memory
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button repeatedly to select
AUDIO IN function.
3
Press the
button on the main unit then press and
hold down the
/ button until "RESET" appears.
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
Possible cause
Is there any MP3/WMA file
available?
Is the device properly
connected?
Is it an MTP device?
Does the device contain AAC
file only?
Is it a copyright protected
WMA file?
Is it a false MP3 file?
Is Variable Bitrate file being
played back?
Is the File Name written in
Chinese or Japanese
characters?
shock,
excessive
static
■ Before transporting the unit
Remove the USB memory device and disc from the unit.
Then, set the unit to the power stand-by mode. Carrying
the unit with the USB memory device or disc left inside can
damage the unit.
■ Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
●
Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
●
Keep your discs away from direct sunlight, heat, and
excessive moisture.
●
Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
NO
Maintenance
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-14
YES
Correct
Advertisement
Table of Contents
