Using Your Induction Cooktop - Fisher & Paykel OR30SDPWIX Installation Instructions And User Manual

Using your induction cooktop

32
US
CA
Control dials
Each cooking zone is activated by a separate control dial positioned on the control panel. The
functions are arranged on the actual dial itself.
If a cooking zone is not turned off (OFF position) the electronic system automatically switches
it off after a pre-set time ranging from 90 minutes to 520 minutes, depending on the power
setting.
OFF A
1
2
1
9
3
2
8
4
7
Control dial
5
6
Power level
Push the dial in and turn it clockwise to set the temperature between Gentle heat and 9
(maximum).
The power level can be modified at any time by turning the dial clockwise or counter-clockwise
to a different setting.
The cooking zone display shows the selected level.
Hot Surface Indicator
When the temperature of a cooking zone is still hot, the relevant Hot Surface indicator lights
up on the display to alert you of the hot surface. Avoid touching the cooktop surface over the
cooking area. Please pay special attention to children. When the is lit on the display, it is
still possible to start cooking again; just turn the control dial to the required power level. The
indicator will disappear when the surface has cooled down to a safe temperature.
Childlock
You may lock the right half, left half or all of the cooktop. Ensure the cooking zones you wish to
lock are turned OFF. Use the front left cooking zone dial to lock the left zones or the front right
cooking zone dial to lock the right zones.
Push and turn the front cooking zone dial for the side(s) you wish to lock to the left ('A" setting)
and hold the dial down until the lights up on the cooking zone displays; then release the
dial(s).
After a few seconds the will go out, but the cooktop remains locked.
To deactivate the childlock repeat the same procedure until the goes out.
If you try to turn a cooking zone on while locked the will show in the display. The will
remain lit until the dial is turned back to OFF.