Using The Zoom - Nikon Coolpix S8000 User Manual

Step 2 Frame a Picture

Using the Zoom

Use the zoom control to activate optical zoom. Rotate
Zoom out Zoom in
the zoom control to g to zoom in so that the subject fills
a larger area of the frame, or f to zoom out, thus
increasing the area visible in the frame.
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
Optical Digital
zoom zoom
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom. The subject is magnified
up to 2× the maximum optical zoom ratio. The camera focuses at the center of the
frame and the focus area is not displayed when digital zoom is in effect.
Maximum optical zoom Digital zoom enabled
C
Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality according to the image mode (A 42) and
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is
increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to
indicate that interpolation is being applied. The position of V moves to the right as image size
decreases, allowing for confirmation of the zoom positions at which shooting without interpolation
is possible at the current image mode setting.
Small image size
Digital zoom can be disabled from the Digital zoom option (A 135) in the setup menu (A 124).
25