Sanyo CLT-3602 User Manual

USER' S MANUAL
Digital Cordless Telephone
MODEL NO. CLT-3602
n
Congratulations
on purchasing our high quality product.
Please read the manual carefully to find out all features and how your telephone works, so you can get
the best out of your new phone.
n
Safety Precautions
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before
using the phone.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol
cleaners.
4. Do not place objects on the line cord that may cause damage.
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion.
6. Avoid spilling of any liquid on the phone.
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only.
8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with
polarity symbols (this instruction is found in the installing batteries section.)
9. Use only the batteries indicated in the User's Manual . Never use other ordinary batteries or
conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage
to the unit.
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with
the usual household waste or in a fire.
11. If you are sure you will not be going to use the handset over a month, please take out the batteries
from the battery compartment.
12. Use only the power supply indicated in the User's Manual .
13. Keep the phone out of the reach of children.
14. Use the phone only in the described manner.
15. Stop using the phone if it becomes damaged.
n
Unpacking
Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
MENU/R C/
Base Charger 2 Handsets User's manual
Warranty card
4 AAA Ni-MH 2 Adapters* Line cord* Warranty card
batteries
* The shape of the plugs can vary according to each country's specification.
n
Phone Layout and Keys Function
Handset
Earpiece
Menu/OK key
Display
Up/CID key
Cancel/Mute key
MENU/R
C/
Left/Int key
Right/Redial key
Down
Dial/Speaker key /Phonebook key
End key
Alph numeric a
keys
key key
Microphone
Charging contacts
Base
Rear and bottom View
Charge pins
Charger
n
Keys Description
Dial/Speaker key
Make/Answer a call.
Activates the speakerphone if pressed during a call.
End/Power key
End a call.
Long press to activate power on/off, as described in par.
On/Off .
Navigation key:
Up/CID key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume during a call.
Enter the CID book, as described in par.
Down/Phonebook key
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume during a call.
Enter the Phonebook, as described in par.
INT key
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line and an internal handset.
Redial key
Enter the redial book, as described in par.
Insert a pause when pre-dialing a number.
Menu/OK key (left)
MENU/R Enter the menu functions in standby mode.
Confirm selections & actions.
Performs "Flash" function.
Cancel/Mute key (right)
Return to the previous menu.
C/
Enter to mute during a call.
Delete an incorrect character/digit.
key
Press and hold to turn on/off keypad lock function.
Set up a conference call, as described in par.
Handset .
n
LCD Window Icons Description
New Call
Indicates you have missed one
or more calls.
Off Hook
Indicates the line is engaged.
Hands-free
Indicates the handsfree function
is enabled.
Battery Icon
Indicates battery charge level.
n
Connecting Lines
1. Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
2. Connect the modular ends of the AC power adapters
to the power jack of the base and charger, then plug
the AC adapter into standard AC wall outlets.
n
Installing Batteries
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your
phone.
1.
Slide the battery cover in the direction of the
Speaker
arrow and pull it out.
2. Insert new batteries as indicated, matching
correct polarity (+,-).
Battery
compartment
cover
3. T o r e p l a c e t h e b a t t e r y
cover, slide the cover up
until it snaps in place.
n
Charging Handset
! Important Note : Before initial operation,
CHARGE THE HANDSET
To charge the handset, you should place it on the base or charger.
Result: When you place the handset on the base or charger, the
handset automatically turns on.
Phone
Power Jack
Line Jack
n
Turning Handset On/Off
If the handset is in power off mode, when you
place the handset on the base or charger, it
automatically turns on. To turn the handset
Page button on or off in standby mode, follow these steps:
1. To turn on the handset when it's off
and hold the key until you switch the
display on. On power up, the handset will
enter subscription mode and search for a
registered base. A message as shown
below will be displayed to the user, and the
signal icon will flash.
searching
2. To turn off the handset , keep the
Turning Handset
pressed until the display disappears.
Basic Functions
CID Book .
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the key.
Phone Book .
n
Making a Call
1. Pick up the handset and press the
Result: The icon appears on the LCD.
2. Dial a telephone number.
Last Number Redial .
3. To end the call, either press the
or replace the handset on the base.
Note :
To make a call to the last number you dialed,
use the Redial feature. For details, see par.
Last Number Redial .
n
Receiving a Call
Calling with more than one
When a new call is received, t he call information
will appear.
If the caller can be identified, the caller's phone
number is displayed.
1. To answer the call, press the
Signal Icon
have activated the Auto Answer function,
Indicates whether the current
when the handset is on the base, simply lift it
signal exists or not. If the
up to answer.
handset is too far from the base,
2. To end the call, either press the
this icon will blink on the LCD.
replace the handset on the base.
Keypad Lock
This icon appears when the
n
Muting the Microphone
keypad is locked.
During a conversation, you can temporarily switch
your phone's microphone off, so that the other
party cannot hear you.
Example: You want to say something to another
person in the room but do not want
the other party to hear you.
To AC wall
outlet
n
Adjusting Audio Volume
During a conversation, you can use the
To phone wall outlet
key to adjust the level of the earpiece (or
the handsfree speakerphone one, if activated)
To AC wall
volume from VOL1 to VOL5 . The selected
outlet
volume will be displayed on the LCD.
n
Ringer Setting
You can select your own external (from the
telephone Network) or internal (from other
handsets registered to the same base) ring tone
and adjust the volume.
1. Press the key.
MENU/R
Notes: 2. Press or key repeatedly to choose
Reversing the orientation may damage
SETTING menu, then press the
the handset.
3. Press or key to choose RING SETUP
The batteries need to be replaced if
and press the key.
they do not recover their full storage MENU/R
capacities after recharging.
4. Use or key to choose INT RING EXT
When replacing the batteries, always
RING , press the key.
MENU/R
use good quality Ni-MH re-chargeable
batteries. Never use other batteries or
conventional alkaline batteries.
n
Last Number Redial
1. Press the
YOU SHOULD FULLY MENU/R C/
MENU/R C/
for about 15 hours.
Result: The LCD displays the last number you
dialed.
2. Press the
Your phone allows you to retrieve the last 10
numbers you have dialed and recall them
quickly.
Search for and dial a number in
If the handset is successful in finding a base, the
Redial Book
handset will enter the standby mode, the display
will show handset number or the handset name
1. Press the
(if you have one saved as described on par. HS
Name ), signal icon, battery icon and current
2. If you want to scroll through the memory,
, press
time. If the handset is unsuccessful in finding a
press
base, the handset will behave according to the
find out the number you want to dial.
Out of Range condition.
3. Press the
Note :
When battery power is very low, if you Notes :
place the handset on the base, the display
If no numbers are found, "
will show as below. YOU SHOULD FULLY
displayed.
CHARGE THE HANDSET BEFORE USING.
When the redial book is full, each time you
dial a new number, the oldest number stored
in the redial book is automatically erased.
----
key
n
CID Book
When you
information is transmitted from the network on
which the call was made (and the caller doesn't
hide it), the caller's phone number is displayed.
Moreover, if you missed one or more calls, the
icon will appear on the LCD. If the CID
memory is full, the
OUT OF AREA
someone calls from an area where the telephone
key. You can enter the desired phone number in company is not offering the caller identification
standby mode, which allows you to make services or is not yet providing number delivery
corrections before dialing. Follow these steps: to your area.
1. Enter a telephone number (up to 32 digits). PRIVATE
Check it. You can also use the key to to prevent his name and number from being sent,
insert a pause. the message will show on the LCD.
key
View and dial any of the CID numbers
Note:
If you make a mistake while entering a
1. Press the
number, press the C/ key to clear the last
digit.
2. Press the
BOOK , and if available, the numbers are
displayed. (You can also access the CID book
2. When the number appears correctly, press
directly by pressing the
the key.
mode.)
3. Use
can make a call by a press of the
can also add the entry to the phonebook.
Result: After you hang up, the LCD displays
the call duration.
Add CID Number to Phone Book
Notes:
1. Press the
You can select the ringer volume by using
or key when the phone rings with 2. Press the
key. If you
BOOK , and if available, the numbers are
an incoming call.
displayed.
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
3. Use
caller's hang-up or after the parallel phone
the desired number displays on the LCD, press
key or
had answered the call. the
MENU/R
n
Key Lock
To mute your microphone, press the C/ key
If you turn on this feature, all keys will be locked.
during the conversation. The " CALL MUTED "
You can answer calls by using the
appears on the LCD.
when you hang up, the phone returns to the
locked mode. This feature is useful to avoid
To unmute the microphone, press the C/ key
pressing keys by mistake.
again. You will restore the normal condition.
To lock the keys, in the standby mode just keep
the key pressed till the display shows "
LOCKED " and
or You can also select the earpiece volume or the
n
Selecting a Language
speaker volume by the AUDIO SETUP in Menu
under HS SETTING , as described in par. HS
The handset
Settings .
languages. You can change the language used
to display the menu messages.
1. Press the
2. Press
SETTING
5. Press or key to choose MELODY or
VOLUME , press the key.
MENU/R
Result: You can select the ring tone from n
HS Name
Melody 1 to 10 or adjust the volume
from Volume 1 to 5, or off. When you
"HS N" is the default name of the handset after
adjust the ring tone or volume, the
registration of handset. The handset number N=
HS
phone plays the selected melody or 1 to 5 reflects the handset is the Nth handset,
MENU/R key.
which is registered to the base. The HS Label is
sounds the selected loudness.
displayed in the standby mode. You can modify it
,
6. Press the key to confirm. by the following steps:
MENU/R
1. Press the
/
2. Press
SETTING
key in standby mode. Use Redial Book options
Using the redial book options, you can add a
number to phone book or delete a number in
the redial book.
key to dial out the number.
1. Press the key.
2. Scroll to the desired number by using the
or key .
3. When the number appears on the display,
press the key to choose the desired
MENU/R
option:
ADD TO PB: allows you to add the number to the
key in standby mode.
phone book. Complete storing the entry by starting
from step 4 described in par."Adding the Phone
Book Entries" (obviously, you will find the number
or key repeatedly until you
already entered in the appropriate field).
DELETE: allows you to delete the selected number.
DELETE ALL: allows you to delete the whole redial
key to dial out the number.
book.
4. To exit, press the C/ key.
EMPTY " is
Note :
At step 3, when you select DELETE
D E L E T E A L L o p t i o n s , a m e s s a g e
" CONFIRM ? " will further ask you to
confirm the deletion. To confirm press MENU/R
K ey, to escape press the key.
Kk C/
receive a call, if the caller's 4. Press the MENU/R key, you are prompted to enter
the name.
5. Enter the name and press the MENU/R key, then you
can modify the number you want to store.
icon will flash on the LCD. 6. Press the MENU/R key, you are able to select the
ring tone from Melody 1 to Melody 10, press
- This message will display when the key to confirm and exit, you will hear a
MENU/R
confirm beep.
Delete a number in the CID Book
1. Press the MENU/R key.
- If the caller has exercised the option
2. Press the MENU/R key again to choose CID BOOK
and if available, the numbers are displayed.
3. Scroll to the number you want to delete by
using or key.
key.
MENU/R
4. When the desired number appears on the
display, press the key.
MENU/R key again to choose the CID MENU/R
5. Use or key to choose DELETE , press
key in standby
the key. The display will show " CONFIRM
MENU/R
? ". Press the key to confirm, you will hear a
MENU/R
beep and the LCD shows the next number.
or key to view the numbers, you
key. You
Delete all numbers in the CID Book
1. Press the MENU/R key.
2. Press the MENU/R key again to choose CID BOOK
MENU/R key.
and if available, the numbers are displayed.
MENU/R key again to choose the CID
3. Press the MENU/R key and use or key to
choose DELETE ALL menu, then press the
key.
MENU/R
or key to view the numbers. When
4. The display shows " CONFIRM ? ", press the
MENU/R key to confirm.
key to enter ADD TO PB menu.
Result: You hear a beep and the phone
returns to the standby mode after
clearing all the CID numbers.
To unlock the keys, keep the key pressed again
key. But till the key lock icon disappears from the display.
Note :
In locked mode, if you press any key, the
phone will generate a warning tone, and the
" HS LOCKED " message will be redisplayed.
HS
the icon.
supports multiple predefined 3. Use or key to choose the LANGUAGE
then press the MENU/R key.
4. The languages will be displayed. Use
MENU/R key. key to scroll through the options. Each
language will be displayed in its own native
or key repeatedly to choose HS
translation.
, press the key.
MENU/R
5. Press the key to select the required
MENU/R
language and you will hear a confirm beep.
3. Use or key to choose HS LABEL , then
press the key.
MENU/R
4. You can enter the handset name (up to 6
characters) by using the alphanumeric keys
(use the C/ key to delete the previous
character if necessary), then press key to
MENU/R
key.
MENU/R
confirm and exit. The handset name will be
modified.
or key repeatedly to choose HS
, press the key.
MENU/R
or
,
,
,
or