Service And Adjustments - Ariens Zoom 42 Manual

Interval Task
Check
Battery
Lubricate
Unit
25 Hours
or Every
Season
50 Hours Check
or Every Fasteners
Season
Check All
Belts
100 Hours
or Every
Season
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before proceeding.
TIPPING SEAT FORWARD
(Figure 9)
Move steering levers to neutral position and
rotate handles outward. Tip seat forward.
Action
Keep battery and battery terminals clean. See "Cleaning Battery and
Battery Cables" on page 27.
1. Apply grease to zerk (1) on each front wheel.
2. Apply grease to quick adjust seat mechanism through slots (2) on
bottom side of seat plate. Work grease into mechanism by sliding
seat back and forth repeatedly.
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts and
bolts to the correct torque values.
Replace worn or deteriorated belts.
• Check hydrostatic belt. See "REPLACING HYDROSTATIC
BELT" on page 30 for hydrostatic belt location.
• Check PTO belt. See "REPLACING PTO BELT" on page 29 for
PTO belt location.

SERVICE AND ADJUSTMENTS

1
2
2
1. Seat Tipped Forward
2. Mounting Hardware
3. Steering Levers
GB - 21
3
Figure 9
1