Card Reader-C1; Super G3 Fax Board - Canon imageRunner Advance C2030 Operating Manual

Card Reader-C1

Item
Available Cards
Card Readout Method
Magnetic Card Reading Direction
Store/Replay
Power Source
Dimensions (H x W x D)
Weight

Super G3 FAX Board

Specifi cations remain the same even when the Super G3 2nd Line FAX Board is installed.
Item
Telephone Line Used *1
Scan Line Density (Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Sizes
Receiving Paper Sizes
Transmission Times
Auto Dial Function
Image Memory
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use
facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
38
Magnetic
Magnetic readout
Face up
Replay
From the main unit
1 1/4" x 3 1/2" x 3 7/8" (32 mm x 88 mm x 100 mm)
Approximately 0.6 lb (295 g)
Public Switched Telephone Network
Normal: 8 pels*2/mm x 3.85 line/mm
Fine: 8 pels*2/mm x 7.7 line/mm
Super-Fine: 8 pels*2/mm x 15.4 line/mm
Ultra-Fine: 16 pels*2/mm x 15.4 line/mm
Super G3: 33.6 kbps, G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
11" x 17" to STMT
11" x 17" to STMT
JBIG: Approximately 2.6 seconds
Address Book: 1,800 destinations (including destinations stored in one-touch buttons)
Approximately 6,000 pages
Specifi cations
Specifi cations