On/Off Switch - Pharos iGPS-BT User Manual

I. iGPS-360 Receiver and Bluetooth Dock
iGPS-BT
Dock
DC Jack
for charging
DC Jack
- Plug either the DC charging adapter (included in PT200 and PT300) or
AC battery charger (included in PT100 and PXT02 accessory) into the
DC Jack to charge the battery.
Refer to III. Battery charging instructions.
iGPS-BT will need to be charged for approximately 2-3 hours before
-
initial use.

On/Off Switch

- Turns the iGPS-BT on or off. Blue LED's will light up when powered.
Bluetooth Status Indicator (Internal Blue LED)
Blinking: Searching for Bluetooth signal
-
- Steady: Bluetooth communication established, ready to use.
Bluetooth Status
Indicator
(Internal Blue LED)
2
iGPS-360
Receiver
On/Off
Switch