Miele WT 945 S WPS Operating Instructions Manual page 66

This machine is supplied ready for
connection to an a.c. single phase 230
- 240 V, 50 Hz supply. The machine is
supplied with a 2 m long mains cable
with moulded plug. The voltage, rated
load and plug rating are given on the
data plate. Please ensure that these
match the household mains supply.
All electrical work should only be
carried out by a suitably competent
person, in accordance with national
and local safety regulations.
If the electrical connection cable is
damaged, it must only be replaced by
a special Miele cable.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
66
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the
terminal in the plug which is marked
with the letter E or by the earth symbol
z or coloured green or green and
yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter A or coloured
red.