Miele WT 945 S WPS Operating Instructions Manual page 59

The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
The four adjustable feet are used to
level the machine. All four feet are
screwed in when the machine is
delivered.
^ Gently tip the machine and prop it up
using a solid wooden wedge for
example, to ensure stability.
,
Make sure the machine does not
slip as this could cause injury.
^ Loosen counternut
screwdriver by turning it
anti-clockwise, then unscrew foot
together with the counternut.
^ Put the machine back on all four feet.
^ Use a spirit level to check the
machine is standing level.
^ Hold the foot
wrench and using a screwdriver turn
the counternut
against the housing.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
with a
firm using a pipe
to the right firmly up
59