Pc Health Status; Miscellaneous Control - JETWAY S755MAX User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Shutdown Temperature
Show PC Health in Post
Detect CPUFAN in Post
Current System Temperature
Current CPU Temperature
Current CPUFAN Speed
Current SYSFAN Speed
Vcore
Vcc1.5
Vcc3.3
+ 5V
+12V
-12V
- 5V
VBAT(V)
5VSB(V)
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled.
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this setting the
system will auto shutdown to protect CPU.
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/Vdd/
3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Auto Detect PCI Clk
Spread Spectrum
Clock Control
** Current Host Clock 200MHz **
HOS Clock at Next Boot is
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is
CPU Vcore Select
AGP VddQ Select
VDIMM Select
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
PC Health Status
Disabled
Enabled
Enabled
25 ° C
38 ° C
5000 rpm
5000 rpm
1.71V
1.51V
3.31V
4.98V
12.22V
-12.36V
-4.99V
3.21V
5.02V
F6:Optimized Defaults
Miscellaneous Control
Enabled
Disabled
By Software
200MHz
By SPD
Default
1.50V(Default)
2.50V(Default)
F6:Optimized Defaults
32
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults