JETWAY 865GDM User Manual page 15

USB Port connector: USB1, UL _ B (USB)
(3)
The connectors are 4-pin connector that connect USB devices to the system board.
(4) LAN Port connector: LAN (for 865GDMP/865PEDMP)
This connector is standard RJ45 connector for Network connector.
(5) PS/2 Mouse & PS/2 Keyboard Connector: KB (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(6) Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board
Parallel Port can be disabled through the BIOS SETUP.
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
(7) Audio Line-In, Lin-Out, MIC Connector : CN1
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC
Line-out :
Line-in :
MIC :
(8) VGA Connector (15-pin D-Sub) Connector: VGA (for 865GDM/865GDMP only)
VGA is the 15-pin D-Subminiature female connector for display monitor.
(9) Serial Port COM1/COM2: COM1/COM2 (COM2 only for 865PEDM/865PEDMP)
COM1/COM2A is the 9-pin D-Subminiature mail connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED PERIPHERALS
SETUP" section for more detail information.
(10) Floppy drive Connector (34-pin block): FDD
This connector supports the provided floppy drive ribbon cable. After connecting the single
plug end to motherboard, connect the two plugs at other end to the floppy drives.
Pin 1
Audio output to speaker
Audio input to sound chip
Microphone Connector
PS/2 Mouse
PS/2 Keyboard COM1
PRINT USB1
VGA/COM2
(Option)
12
Please refer to Chapter 3
LAN
MIC
LINE-IN
LINE-OUT
USB