Selecting Door Switching Systems; Door System Confirmation - Pioneer MEH-P5000R Operation Manual

Selecting Door Switching Systems

It is necessary to select the correct "Door System Type" (Negative or Positive switching)
for that of your vehicle. Initially, the system is set for vehicles with the grounding type
(Negative switching).
Select the correct "Door system type" of your vehicle from below.
7 Vehicles to select "DOOR-L :CLS"
EUROPEAN, JAPANESE, GM,
CHRYSLER
• Select "DOOR-L :CLS" or
"DOOR-H :CLS" with the
2/3 buttons.

Door System Confirmation

The door system confirmation feature was incorporated to ensure that the correct door sys-
tem type has been selected. (e.g. Set to "DOOR-H :CLS" for JAGUAR vehicles.)
1. First, close all the vehicle's
doors. If the correct door sys-
tem type has been selected then
the Display will show "DOOR-
H :CLS".
If not, select the alternative door sys-
tem type by pressing the
button. Lastly, confirm each door
triggers the Alert by opening and
closing each vehicle's door.
2. As the vehicle's door is opened
the display should change
accordingly ("DOOR-H :CLS"
– "DOOR-H :OPN").
3. Press the BAND button and
cancel the RFP Alert Setting
Menu.
Setting of the "RFP Alert" is now
complete.
Note:
• In case that the battery is disconnected or the RESET button is pressed, it may be necessary to
reprogram the RFP Alert Menu; otherwise this setting needs to be done only once.
7 Vehicles to select "DOOR-H :CLS"
[ or ]
JAGUAR, MERCEDES*, FORD, etc.
* Some Models Only.
59