How To Fill The Rinse Aid Dispenser - Küppersbusch IGV 645.2 Instructions For Use Manual

HOW TO FILL THE RINSE AID DISPENSER

The rinse aid facilitates drying and prevents the formation of unsightly
spots and streaks on crockery. Before using the dishwasher for the
first time, fill the rinse aid dispenser. Only use rinse aids recommended
for use in domestic dishwashers.
1. Press button A to open the cover (see drawing).
2. Fill the dispenser with rinse aid up to the dotted line
(about 100 ml maximum).
Immediately wipe away any rinse aid spilt accidentally! This prevents
the formation of excess suds which may spoil washing results.
3. Close the cover.
Thereafter, regularly check the rinse aid level.
How to adjust the rinse aid dosage regulator:
Factory setting: Position 4.
If you are not satisfied with washing or drying results, change the rinse
aid dosage setting.
1. Press button A to open the cover (see drawing).
2. If crockery is prone to whitish streaks: reduce the dosage by
turning the dial to a lower setting (1-3) using a coin or the like.
If crockery is not perfectly dry: increase the dosage by turning the
dial to a higher setting (5-6).
3. Close the cover.
Rinse aid level indicator:
Visual indicator:
light add rinse aid
dark sufficient rinse aid.
Electric indicator (if provided):
The indicator lamp on the control panel lights up when more rinse aid
needs to be added.
18
A