Subscribe to Our Youtube Channel
Related Manuals for Küppersbusch IGV 655.1
Summary of Contents for Küppersbusch IGV 655.1
- Page 1 LIBRETTO ISTRUZIONI Manual de instrucciones página 20 Instruction book page 38 IGV 655.1...
-
Page 2: Table Of Contents
Contents Safety instructions Installation instructions Building-in Disposal Levelling Fixing to the adjacent units Economical end ecological dishwashing Water supply connections Description of the appliance Water inlet hose with safety valve Water outlet hose connection The control panel Electrical connection Prior to using for the first time Hints for test centres Setting the water softener Filling with salt... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be Under no circumstances should you attempt to repair the retained with the appliance for future reference. Should machine yourself. Repairs carried out by inexperienced the appliance be sold or transferred to another owner, or persons may cause injury or serious malfunctioning. -
Page 4: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN143 The control panel Function push buttons:... -
Page 5: Prior To Using For The First Time
Audible signals 3. Press the function push button 3, the indicator lights of function push buttons 1 and 2 turn off while the indicator Audible signals have been introduced to help indicate which light of the push button 3 goes on flashing, at the same time operations the dishwasher is performing: the "end of programme"... -
Page 6: Filling With Salt
Setting electronically Filling with salt (The dishwasher must be switched off) Special salt can be added in one of two ways: The dishwasher is factory set at level 5. If it’s necessary to set If you are using dishwasher detergent that already contains a new level, proceed as follows. -
Page 7: Rinse Aid
Rinse aid Filling with rinse aid (Rinse aid dispenser type B) Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The 1. Open the container by turning the lid (A) anticlockwise. dispenser, which is positioned inside the door, holds about 110 2. - Page 8 Deactivation of the inflow of rinse aid (The dishwasher must be switched off) When the inflow of rinse aid has been deactivated, also the rinse aid indicator light on the control panel is automatically deactivated. 1. Press the On/Off push button, all indicator lights of the programme push buttons will illuminate (setting mode).
-
Page 9: In Daily Use
In daily use Check if it’s necessary to refill with special salt or rinse aid Load cutlery and dishes into the dishwasher. Fill with dishwasher detergent . Select a wash programme suitable for the cutlery and dishes. Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. -
Page 10: The Upper Basket
Cutlery should be placed in the removable cutlery basket with Adjusting the height of the upper basket the handles facing downwards. If the handles protrude from If washing very large plates you can load them in the lower the bottom of the basket, obstructing the lower spray arm, load basket after moving the upper basket to the higher position. -
Page 11: Use Of Detergent
Use of detergent Detergent tablets Only use detergents specifically designed for use in Detergent tablets of different brands dissolve at different dishwashers. speeds. For this reason some detergent tablets cannot develop their full cleaning power during short programmes. Using no more then the correct amount of detergent Therefore please use normal programmes with prewash when contributes to reducing pollution. -
Page 12: Washing Programmes
Washing programmes Programme Degree of soil Press the Cycle (3) Consumption values programme description Programme duration Energy Water type of load button (in minutes) consumption consumption (in kWh) (in litres) Hot prewash Heavy soil. Main wash up to 70°C Intensive 70° 2 warm rinses Crockery, cutlery, 85 - 95... -
Page 13: Starting A Washing Programme
Starting a washing programme In this fully integrated appliance the controls are located on the 6. Setting/cancelling the "delay start" top of the door. When selecting a programme, the door needs The setting of the delay start occurs after selecting to be open. -
Page 14: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel To ensure a correct with a damp soft cloth. If necessary use only neutral working of the dishwasher, detergents. Never use abrasive products, scouring pads or NEVER try to remove the solvent (acetone, trichloroethylene etc..). -
Page 15: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button. The intervention of an alarm is indicated by a combination of flashing indicator lights and audible signals, as indicated in the following chart Open the door and carry out the following suggested corrective actions. -
Page 16: Service And Spare Parts
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 17: Installation Instructions
Installation instructions Any electrical and/or plumbing work required to install Do not use, for connection, old hoses which have been this appliance should be carried out by a qualified used in another appliance. electrician and/or plumber or competent person. If the machine is connected to new pipes or pipes which have Remove all packaging before positioning the machine. -
Page 18: Water Outlet Hose Connection
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door on the right. 1. -
Page 19: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"...
Need help?
Do you have a question about the IGV 655.1 and is the answer not in the manual?
Questions and answers