4 Calls
Note
•
When the power fails, the phone cannot access
emergency services.
Tip
•
Check the signal strength before you make a call or
when you are in a call (see 'Check the signal strength'
on page 9).
Make a call
You can make a call in these ways:
•
Quick call
•
Quick call through the direct keys
•
Dial before you call
•
Redial the most recent number
•
Call from the redial list.
•
Call from the phonebook list
•
Call from the call log
Tip
•
For information of how to make a call from the redial
list, phonebook list and call log, see the base station's
user manual.
Quick call
1
Press
or
.
2
Dial the phone number.
» The number is dialed out.
» The duration of your current call is
displayed.
10 EN
Call through the direct key
To make a quick call from the record pre-saved
in the direct key, press
M2 or M3.
» The number is dialed out.
Tip
•
For information of how to set the direct keys, see the
next section.
Set the direct keys
1
Enter the number, the press and hold M1,
M2 or M3.
2
Enter the name, then press [OK] to
confirm.
3
Edit the number if necessary, then press
[Save] to confirm.
4
Select a ring tone, then press [OK] to
confirm.
» The direct key is set.
Note
•
If there is already a record saved in the direct key, you
need to confirm whether you want to replace the old
record with the new one.
Dial before you call
1
Dial the phone number
To erase a digit, press [Clear].
•
•
To enter a pause, press and hold .
2
Press
or
to dial out the call.
Note
•
The call timer displays the talk time of your current call.
Note
•
If you hear warning tones, the handset is almost out
of battery or the handset is out of range. Charge the
battery or move the handset nearer to the base station.
, then press M1,
or