Basic Operations; Power On/Off; Selecting A Source; Adjusting The Volume - Pioneer DEH-P3100UB Operation Manual

Section
02 Operating this unit

Basic Operations

Power ON/OFF

Turning the unit on
% Press SRC/OFF to turn the unit on.
Turning the unit off
% Press SRC/OFF and hold until the unit
turns off.

Selecting a source

You can select a source you want to listen to.
% Press SRC/OFF repeatedly to switch be-
tween the following sources.
DEH-P4100SD
TUNER (tuner)—TELEVISION (television)—
COMPACT DISC (built-in CD player)—
MULTI CD (multi-CD player)—IPOD (iPod con-
nected with the interface adapter)—USB (USB
storage device)/USB-IPOD (iPod connected
using USB input)—SD (SD memory card)—
EXTERNAL (external unit 1)—EXTERNAL (ex-
ternal unit 2)—AUX1 (AUX1)—AUX2 (AUX2)
—BT AUDIO (BT audio)—TELEPHONE (BT tel-
ephone)
DEH-P3100UB
TUNER (tuner)—TELEVISION (television)—
COMPACT DISC (built-in CD player)—
MULTI CD (multi-CD player)—IPOD (iPod con-
nected with the interface adapter)—USB (USB
storage device)/USB-IPOD(iPod connected
using USB input)—EXTERNAL (external unit
1)—EXTERNAL (external unit 2)—AUX1
(AUX1)—AUX2 (AUX2)—BT AUDIO (BT
audio)—TELEPHONE (BT telephone)
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
10
En
— When the iPod is not connected to this
unit with the interface adapter.
— When the SD memory card is not inserted
into the slot.
— When AUX (auxiliary input) is set to off
(refer to page 29).
— When the BT AUDIO source is set to off
(refer to page 30).
! When a USB storage device or iPod is not
connected to the USB port of this unit,
NO DEVICE is displayed.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 29).
! Charging the portable audio player using
car's DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Turn MULTI-CONTROL to adjust the
sound level.