Note
•
See the explanations of the above options in
the following pages.
[EasyLink]
Your product supports Philips Easylink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
•
[On] - Enables EasyLink features.
•
[Off] - Disables EasyLink features.
[One Touch Play]
When you press PLAY on the remote control,
the TV (if it supports one-touch play) and
the Home Theatre System will be turned on.
Disc play starts if there is a disc in the Home
Theatre System and the TV automatically
switches to the correct channel to show the
video content.
•
[On] - Enables one-touch play feature.
•
[Off] - Disables one-touch play feature.
[One Touch Standby]
When you press and hold
remote control, this Home Theatre System
and all the connected HDMI CEC devices (if
they support one-touch standby) switch to
standby mode simultaneously.
•
[On] - Enables one-touch standby
feature.
•
[Off] - Disables one-touch standby
feature.
Note
•
When
[Off] is selected, the Home Theatre
System cannot be switched to standby by a
remote control from the TV or other devices.
( Standby) on the
[System Audio Control]
When you play a device where the audio
output is routed to this Home Theatre System,
this Home Theatre System switches to the
corresponding audio source automatically.
•
[On] - Enables system audio control
feature. Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
•
[Off] - Disables system audio control
feature.
[Audio Input Mapping]
Maps the connection between other devices
and the audio input jacks of this Home
Theatre System. Only the detected devices
will be displayed for mapping.
Note
•
You need to enable the
Control] before you can map the audio input.
Advanced Setup
1
Press
.
2
Select [Settings], then press OK.
3
Select [Advanced Setup], then press .
Video Setup
BD Live Security
Network
Audio Setup
Software Download
Preference Setup
Clear Local Storage
EasyLink Setup
Advanced Setup
DivX® VOD Code
Version Info.
Restore Factory Settings
4
Select an option, then press OK.
5
Select a setting, then press OK.
•
To return to the previous menu,
press
BACK.
•
To exit the menu, press
[System Audio
Off
.
EN
35