Use Philips Easylink - Philips HTS7200 User Manual

Use Philips EasyLink

Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
•
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
1
Turn on the HDMI CEC operations on
the TV and other connected devices. See
TVs/devices manual for details.
2
You can now enjoy the following Philips
EasyLink controls.
EasyLink
Turn off or turn on all EasyLink features.
One-touch play
When you press PLAY on the remote
control, the TV (if it supports one-touch
play) and the Home Theatre System will be
turned on. Disc play starts if there is a disc
in the Home Theatre System and the TV
automatically switches to the correct channel
to show the video content.
One-touch standby
When you press and hold
the remote control, this Home Theatre
System and all the connected HDMI CEC
devices (if they support one-touch standby)
switch to standby mode simultaneously.
System Audio Control
When you play a device where the audio
output is routed to this Home Theatre
System, this Home Theatre System
switches to the corresponding audio source
automatically.
To use one-touch audio, map the connected
devices correctly to the audio input jacks of
this Home Theatre System.
( Standby) on
Audio Input Mapping
When you map the connection between
other devices and the audio input jacks of
this Home Theatre System, you can enjoy
the System Audio Control (one-touch audio)
feature.
Map the devices to the audio inputs
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
EasyLink
Video Setup
Audio Setup One Touch Play
Preference Setup One Touch Standby
EasyLink Setup
System Audio Control
Advanced Setup
Audio Input Mapping
1
Press , select [Settings], then press OK.
2
Select [EasyLink Setup], then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default.
3
Select [System Audio Control] > [On] .
4
Read the on-screen instructions and
press OK to select [Continue].
»
The Home Theatre System scans and
displays the valid devices.
5
Press OK to select [Continue].
On
On
On
Off
EN 19