Play Audio From Tv Or Other Devices; Play From An Mp3 Player; Use Philips Easylink - Philips HTS3560 User Manual

Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing the
tuning grid erases all preset radio stations.
1
Press RADIO.
2
Press (Stop).
3
Press and hold
100 kHz and 50 kHz frequency.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device.

Play from an MP3 player

Connect and play audio files from an MP3 player
or other external audio devices.
1
Connect the MP3 player to the home
theater.
2
Press AUDIO SOURCE repeatedly until
'MP3 LINK' appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.
EN
14
(Play) to toggle between

Use Philips EasyLink

The home theater supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Note
•
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
1
Switch on the HDMI CEC operations on
the TV and other connected devices. See
the manual of the TV or other devices for
details.
2
Press (Home).
3
Select [Setup], then press OK.
4
Select [EasyLink] > [EasyLink], then press
OK.
5
Select [On], then press OK.
6
You can now enjoy the following Philips
EasyLink controls.
One-touch play
When you play a disc, the TV automatically
switches to the correct channel.
One-touch standby
When you press and hold
remote control, the home theater and all the
connected HDMI CEC devices (if they support
one-touch standby) switch to standby mode
simultaneously.
System Audio Control
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, enable this feature and
follow the instructions on the TV to map the
connected devices correctly to the audio input
jacks of the home theater.
Audio Input Mapping
Updates audio input mapping if there are new
devices connected.
(Standby) on the