Connection Settings - Nokia N70-1 User Manual

Connection settings

Data connections and access points
Your device supports packet data connections ( ), such
as GPRS in the GSM network.
Glossary: General packet radio service (GPRS) uses
packet data technology where information is sent in
short packets of data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Packet data connections in GSM and UMTS
networks
When you use your device in GSM and UMTS networks,
multiple data connections can be active at the same time
and access points can share a data connection. In the
98
UMTS network, data connections remain active during
voice calls. To check the active data connections, see
'Connection manager', p. 88.
The following indicators may be displayed below the signal
indicator, depending on which network you use:
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
UMTS network, packet data is available in the network.
UMTS network, packet data connection is active, data is
being transferred.
UMTS network, multiple packet data connections are
active.
UMTS network, packet data connection is on hold.
Receive access point settings
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your device. See 'Data and settings', p. 57.