Package Contents - Hama E 500 Operating Instruction

Contents

• Package contents

• Position
• Connecting the loudspeaker system
• Operation
• Settings with Windows XP
• Settings with Windows Vista
• FAQ
• Safety notes
• Specifi cations
Package contents
• 2 x Satellites
• 1 x Audio cabel
While you are unpacking, ensure that all components are
included and that there is no visible damage (crimped
cables, damaged insulation, etc.)
We recommend that you keep the packaging, including
the Styrofoam inserts, for transport at a later time.
Position
1. Place the loudspeakers to the left and right of the
monitor and position them so that they face toward
you.
2. The distance between each of the two speakers and
your head should be as equal as possible.
Connecting the loudspeaker system
Connect the cable to the green jack plug on the
loudspeaker output socket on your sound card. Connect
the power supply unit cable to the socket on the rear of
the satellite and then plug the power supply unit in to a
free outlet.
Carefully read through the safety notes before using the
device for the fi rst time.
Operation
Switching the loudspeakers on
Press the on/off switch on the loudspeaker.
Volume
You can control the volume with the control on the
loudspeaker.
Headphone output
When you attach headphones to the loudspeaker, the
audio signal to the loudspeaker is automatically
interrupted and the signal is only played back on your
headphones. You can continue to use the volume control
to control the volume on your headphones.
9