TRENDnet TEW-711BR User Manual page 43

TRENDnet User's Guide
1. Log into your router management page (see "Access your router management page"
on page 27).
2. Click on Routing, and click on Static.
3. Review the static route settings.
•
Network Address – Enter the IP network address of the destination network
for the route.
(e.g. 192.168.20.0)
• Network Mask – Enter the subnet mask of the destination network for the
route.
(e.g. 255.255.255.0)
• Gateway Address – Enter the gateway to the destination network for the
route.
(e.g. 192.168.10.2)
• Interface – Click the drop-down list and select the Interface on your router
where the route is active.
(e.g. LAN)
• Metric – Enter the metric or priority of the route. The metric range is 1-15, the
lowest number 1 being the highest priority. (e.g. 1 )
• Add – Saves the static route.
© Copyright 2013 TRENDnet. All Rights Reserved.
To modify an existing reservation, click on the entry in the static route list. When
selected, the entry will be highlighted.
•
Update – Saves changes to an existing static route.
• Delete – Removes an existing static route.
• Cancel – Discards changes to existing static route.
TEW-711BR
40