Creative Live! Drive IR Quick Start Manual page 8

8 Live! Drive IR Quick Start SB0010
2. Connect the cables to the Live! Drive IR as shown in Figure 4.
Live! Drive IR
Orange-colored wire
Connector for
future upgrades
JP1
Red-colored wire
Jumper for microphone
type selection
Light grey
flat cable
(Optical)
Digital I/O card
3. Slide the Live! Drive IR into the vacant 5¼" drive bay, and then secure its sides to the casing
with the screws provided.
Power splitter cable
Digital
J3
DIN cable
J2 J1
Black circle on the
underside of the cable
Sound Blaster Live! card
Figure 4: Connecting cables to the Live! Drive IR.
To system
power supply unit
Digital DIN
metal bracket
Red-colored wire
Dark grey
flat cable