Installing Software - Creative Live! Drive IR Quick Start Manual

Installing Software

Additional Features in
Device Controls
Digital I/O
Live! Drive
When you enable this feature,
remove the ¼" to 3.5mm adapter
from the Headphones jack if you
are not using it. Otherwise, no
sound will be heard from the
speakers.
14 Live! Drive IR Quick Start SB0010
1. Insert the installation disc into your CD-ROM drive.
The disc supports Windows AutoPlay mode and starts running automatically.If not, see
"Troubleshooting" on page 17.
2. Follow the instructions on the screen to complete the installation.
After you install the software for the Live! Drive IR, you will be able to enable the SPDIF
Bypass feature for your digital inputs and outputs, and mute your speakers when you plug your
headphones into Live! Drive IR. These two new features appears as two new tabbed pages in
Device Controls.
To enable the SPDIF Bypass feature:
• On the Digital I/O tabbed page, select the Enable check
box to place a check mark in it.
SPDIF Bypass is required if you want audio signals
passing through SPDIF In to be routed directly to SPDIF
Out, without passing through the processor chip.
To mute the speakers when using headphones:
• On the Live! Drive tabbed page, select the Mute
speakers when using headphones check box to place a
check mark in it.