Virtualization Software - HP ProLiant SL4540 Specification

QuickSpecs
Standard Features
System Fans
Operating Systems and

Virtualization Software

Support for ProLiant
Servers
Graphics (per node)
Form Factor
On System Management
System ships standard with 5 Dual fan modules.
Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: VMware is not supported using the SL4500 H220 Host Bus Adapter
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from
HP, please visit our OS Support Site at:
http://www.hp.com/support/SL4540Gen8
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
4.3U form factor
NOTE: Can be racked as either a 5U tall chassis or as three chassis in 13U
HP iLO Management
Engine
DA - 14406 North America — Version 16 — January 17, 2014
HP ProLiant SL4540 Generation 8 (Gen8) Server
http://www.hp.com/go/ossupport
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is
the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the
moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media. No more SmartStart CDs or
Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning
information and to view usage videos.
and our driver download page:
for additional
Page 10