HP 5800 Quickspecs page 23

QuickSpecs
Configuration
License
HP WX5000 32 AP License Upgrade
Configuration Rules:
Note 1
External Redundant Power Supplies
HP RPS 800 Redundant Power Supply
Height = 1U
includes 1 x c13
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
Configuration Rules:
Note 1
Note 2
Note 3
Note 4
Note 5
Options for the HP RPS 800 and 1600 External RPS Power Supplies
HP X290 1000 A JD5 2m RPS Cable
HP X290 1000 A JD5 Non-PoE 2m RPS Cable
If this license is selected, Then one of these modules should be selected or be on site:
JD443A - HP A5800 Access Controller Module for 32-64 Aps
JD441A - HP A5800 Access Controller Module for 64-256 Aps
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or
onsite.
Localization required.
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
This power supply only supported on switches JC105A and JC100A.
This power supply only supported on switches JC099A, JC101A, JC103A, JC104A.
DA - 13807 North America — Version 24 — January 16, 2014
HP 5800 Switch Series
JD463A
See Configuration
Note:1
JD183A
See Configuration
Note:2, 4
JG136A
See Configuration
Note:2, 3, 5
JG137A
See Configuration
Note:1, 3
JD187A
See Configuration
Note:3
JD188A
Page 23