Table of Contents
Advertisement
Display Messages
ALERT
Battery is low.
Card ERROR
Connecting to the
network
File could not be
saved because
battery is low.
Folder cannot be
created.
Images are being
transferred. Stop
transfer and turn
off power?
LENS ERROR
LENS ERROR 2
Memory Full
Open the flash
unit.
The camera's protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery power is low.
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 108).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Camera power was turned off while image data was being
copied to a computer or other device using a FlashAir card
(page 95).
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 29).
You are attempting to turn off power while image data is
being transferred using the Eye-Fi card (page 93).
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The Anti Shake unit of the camera may be malfunctioning. If
the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
29).
You are trying to shoot with flash while the flash unit is
closed. Slide the flash switch to open the flash unit.
128
Appendix
Advertisement
Table of Contents
