Table of Contents
Advertisement
9. Customizing Your Media Player Settings
OR
Use the left and right arrows on the remote to scroll through the Settings screens until you find
the Network screen.
3.
Select Wired Setup, then press OK.
4.
Select Dynamic IP (AUTO), then press OK.
5.
Press OK, then press OK again to save the new network settings.
The new IP address appears on the Network screen.
Adding Your Media Player to a WLAN
Follow the instructions in this section to add your media player to a WLAN, or update the
media player's wireless network settings to match your WLAN.
Your media player can save connection settings for up to three wireless networks.
You will need:
•
SSID (or network name) of the WLAN(s)
•
Security keywords or codes for the WLANs
•
Connection type—access point (recommended), peer-to-peer, or wireless N router.
To change your media player's wireless network settings:
1.
On the Home screen, press Menu, select Settings, then press OK.
2.
Press Menu, select Network Setup, then press OK.
OR
Use the left and right arrows on the remote to scroll through the Settings screens until you find
the Network screen.
3.
Select Wireless Setup, then press OK.
4.
Select Connection1 to set up the first connection, then press OK.
Alternatively, select Connection2 or Connection3 if you are setting up more than one
wireless network profile.
5.
Select the connection mode for the WLAN, then press OK.
6.
Follow the on-screen instructions to enter the WLAN information.
7.
Press OK to save the new network settings.
Media Player User Guide
Changing the Media Player's Network Settings
61
Advertisement
Table of Contents
