Table of Contents
Advertisement
9. Customizing Your Media Player Settings
This table shows which resolutions are supported by which connectors:
Composite Connector
480i (NTSC)
576i (PAL)
Note:
NTSC (480p, 60 Hz)—Standard North American television resolution
PAL (576p, 50 Hz)—Standard European television resolution
3.
Press OK to change the setting.
Customizing the Audio Settings
To customize your media player's audio settings:
1.
On the Home screen, press Menu, select Settings, then press OK.
2.
Press Menu, select Audio Setup, then press OK.
OR
Use the left and right arrows on the remote to scroll through the Settings screens until you find
the Video screen.
3.
Adjust the settings as required, following the information in "Ensuring Softer Sound at Night"
on page 57 and "Adjusting the Digital Output Settings" on page 58.
Ensuring Softer Sound at Night
When Night Mode is enabled, the intensity of bass sounds are automatically lowered so that
others are not disturbed when you use the media player.
When Comfort mode is enabled, high and low volume levels of all media and TV channels
are automatically moderated so that the volume becomes neither too loud nor too soft when
you change from one media format to another.
To ensure that sound is softer and controlled at night:
1.
On the Audio screen, select Night Mode, then press OK.
2.
Select On to turn on Night Mode, or Comfort to turn on Comfort mode, then press OK.
Media Player User Guide
Component/HDMI
Connector
480i
480p
(NTSC)
576i
576p
(PAL)
720i
720p
1080i 1080p
Customizing the Audio Settings
57
Advertisement
Table of Contents
