Table of Contents
Advertisement
www.weslo.com
USER’'S MANUAL
Model No. WLEL82012.0
Serial No.
___
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-866-699-3756
Mon.––Fri., 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for Weslo Momentum R 4.2 Elliptical
Summary of Contents for Weslo Momentum R 4.2 Elliptical
- Page 1 USER’’S MANUAL Model No. WLEL82012.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 4: Before You Begin
Thank you for selecting the new WESLO ® manual. To help us assist you, note the product model MOMENTUM R 4.2 elliptical. The MOMENTUM R 4.2 number and serial number before contacting us. The provides a selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable. -
Page 5: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 6: Assembly
ASSEMBLY •• To hire an authorized service technician to •• In addition to the included tool(s), assembly assemble this product, call 1-800-445-2480. requires the following tool(s): one Phillips screwdriver •• Assembly requires two persons. one adjustable wrench •• Place all parts in a cleared area and remove the packing materials. - Page 7 3. The Console (23) requires four AA batteries (not included); alkaline batteries are recommended. Do not use old and new batteries together or alkaline, standard, and rechargeable batter- ies together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries.
- Page 8 5. While a second person holds the Upright (2) near the Frame (1), connect the Upper Wire (44) to the Reed Switch Wire (53). Next, connect the Resistance Cable (45) to the Lower Resistance Cable (55) in the following way: ••...
- Page 9 6. Identify the Left Upper Body Arm (6). Insert the Left Upper Body Arm (6) into an Upper Body Leg (5); make sure that the hexagonal holes are in the indicated location. Attach the Left Upper Body Arm (6) to the Upper Body Leg (5) with two M6 x 38mm Bolts (50) and two M6 Locknuts (27).
- Page 10 8. Identify the Left Pedal Arm (11). Attach a Pedal (13) to the Left Pedal Arm (11) with two M6 x 45mm Flat Head Screws (36). Repeat this step for the other Pedal (not shown) and the Right Pedal Arm (not shown). 9.
-
Page 11: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL To dismount the elliptical, wait until the pedals come to a complete stop. IMPORTANT: The elliptical does To mount the elliptical, hold the handlebars and step not have a freewheel; the pedals will continue to onto the pedal that is in the lowest position. - Page 12 CONSOLE DIAGRAM HOW TO USE THE MANUAL MODE 1. Turn on the console. To turn on the console, press the On/Reset button or begin pedaling. The entire display will turn on for a moment; the console will then be ready for use. 2.
- Page 13 When you turn or decrease your speed, bars will appear or disap- on the console, pear in the RPM meter. Indicator the scan display will be selected To cancel the scan mode, press the Display button. automatically. The indicator below the word SCAN will disappear. An indicator will The upper section of the display will then show only appear below...
- Page 14 HOW TO USE A QUICK PACE WORKOUT If your pedaling speed is slower than the cur- rent target speed, an arrow will appear next to the 1. Turn on the console. RPM meter to prompt you to increase your speed; if your pedaling speed is faster than the target To turn on the console, press the On/Reset button speed, an arrow will prompt you to decrease your...
-
Page 15: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. Next, remove the two M4 x 25mm Screws (56) and the Replace any worn parts immediately. four M4 x 16mm Screws (42) from the Left Shield (3). To clean the elliptical, use a damp cloth and a small Note: For clarity, the pedal discs are not shown in the amount of mild soap. - Page 16 HOW TO ADJUST THE DRIVE belt HOW TO ADJUST THE RESISTANCE STRAP If the pedals slip while you are pedaling, even when If the resistance knob is turned to the highest setting the resistance is adjusted to the highest setting, the and there is not enough pedaling resistance, the resis- drive belt may need to be adjusted.
-
Page 17: Exercise Guidelines
EXERCISE GUIDELINES Aerobic Exercise——If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian. -
Page 18: Part List
PART LIST Model No. WLEL82012.0 R1012B Key No. Qty. Description Key No. Qty. Description Frame M10 Washer Upright M6 x 45mm Flat Head Screw Left Shield Pedal Arm Bushing Right Shield M8 Locknut Upper Body Leg M10 Small Washer Left Upper Body Arm Pedal Arm Bolt Set Idler Assembly M8 x 22mm Flat Head Screw... -
Page 19: Exploded Drawing
EXPLODED DRAWING Model No. WLEL82012.0 R1012B... -
Page 20: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...
Need help?
Do you have a question about the Momentum R 4.2 Elliptical and is the answer not in the manual?
Questions and answers