Sony SRS-BTV5 Help Manual page 24

Help Guide
SRS-BTV5
Getting Started
BLUETOOTH
One touch connection (NFC)
Music
Phone calls
Troubleshooting
Important information
© 2012 Sony Corporation
Pairing and connecting with a "Walkman"
1. Place a "Walkman" within 1 meter (3 feet) of the system.
2. Slide the POWER switch to turn on the system.
The system enters pairing mode automatically in the default setting.
The
To enter pairing mode the next time you use the system, slide and hold the switch to
the PAIRING side for about 2 seconds when the system is turned off. The system
Contents list beeps when it enters pairing mode.
3. Perform the pairing procedure on the "Walkman" to detect the system.
When the list of the detected devices appears on the display of the "Walkman," select
"SRS-BTV5."
If passkey input is required on the display of the "Walkman," input "0000."
A Passkey may be called a "Passcode," a "PIN code," a "PIN number," or a
"Password."
4. Make the BLUETOOTH connection from the "Walkman."
When the connection is made, the
For details, refer to the operating instructions supplied with your "Walkman."
Note
Once BLUETOOTH devices are paired, there is no need for pairing again, except in the
following cases:
Pairing information is deleted after repair, etc.
The system is paired with 5 or more devices. The system can be paired with up to 4
devices; if a new device is paired after 4 devices have been paired, the device whose
latest connection time is the oldest among the 4 paired devices is replaced by the
new one.
When recognition of the system by the device to be connected is deleted.
The system is initialized. All pairing information is deleted.
(BLUETOOTH) indicator (blue) flashes fast in pairing mode.
24
Search Search
Top > BLUETOOTH > BLUETOOTH connection
(BLUETOOTH) indicator (blue) lights up.
>