Data Exchange; Exiting Easysuite And Removing The Hama Link Cable; Using The Easysuite Data Transfer Program On Mac Os - Hama USB 2.0 Link Cable Operating Instruction

d Bedienungsanleitung

2.1.6 Data exchange:

Method 1: Select the fi le to be transferred and drag and drop it to the target position.
Method 2: Select the fi le to be transferred, right-click the fi le and choose the "Copy" command from the opened
context menu and then choose "Paste" in the target position.
Method 3: Select the fi le to transfer and use the "Copy" or "Paste" commands from the main menu "Edit".
22

2.2 Exiting EasySuite and removing the Hama link cable

1. Choose the "Exit" command from "System" on the main menu or click on the "X button" in the upper right corner
of the window to exit the program.
2. Click on the "Safely Remove Hardware" icon in the task bar, select the relevant entry and then click "Stop".
You can now safely unplug the link cable from your computer.
3. Using the EasySuite Data Transfer Program on Mac OS X
EasySuite is stored in the link cable so that you do not need to install any additional software.
After the USB link cable is connected to and installed on both computers, the program automatically starts on both
computers. If this does not happen, open the device/drive labelled EasySuite. Here you can manually run the program
"EasyMacCopy".
23