Functions Of The Easysuite Program; Functions Of The Toolbar; Creating A New Folder - Hama USB 2.0 Link Cable Operating Instruction

d Bedienungsanleitung
The program establishes a direct connection as soon as it is started. When this happens, EasySuite displays the
contents of both connected computers.

2.1 Functions of the EasySuite program

Note: Term defi nition (remote computer and local computer)
The computer that you are sitting in front of is called the "Local Host". This computer is also called the
source computer later in this manual.
The other computer is referred to as the "Remote Host" in the program, which is also called the target computer later in
this manual.

2.1.1 Functions of the toolbar

18
g Operating Instruction
Local full speed = Source computer transfers data at a max. rate of 12 Mbit/s (USB 1.1 speed).
Local high speed = Source computer transfers data at a max. rate of 480 Mbit/s (USB 2.0 speed).
Remote full speed = Target computer transfers data at a max. rate of 12 Mbit/s (USB 1.1 speed).
Remote high speed = Target computer transfers data at a max. rate of 480 Mbit/s (USB 2.0 speed).
Read only = Write-protection on the local computer switched on/off.
Tx/Rx = Data is transferring.
Refresh = Updates the disk display.
Cut = Cuts the selected fi le.
Copy = Copies the selected fi le.
Paste = Pastes the selected fi le.
Delete = Deletes the selected fi le.

2.1.2 Creating a new folder

Right-click in the right area of the program window and select "Make directory" from the context menu to create
a new folder.
19