Page 1
Hama GmbH & Co KG D-86651 Monheim/Germany www.hama.com All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Page 2
N O T E B O O K USB 2.0 Linkkabel Link Cable 00102173...
Optimierungen von Microsoft vorgenommen wurden, die sich unter Umständen auf die Geschwindigkeit des USB-Linkkabels auswirken könnte. Da es sich bei dem Hama USB Linkkabel um eine Plug- and Play-Lösung handelt, ist eine vorherige Treiberinstallation nicht nötig. Starten Sie daher Ihr Betriebssystem und stecken Sie das USB Linkkabel an eine freie USB-Buchse ein.
2. Verwendung des EasySuite Datenübertragungsprogrammes Das Programm EasySuite ist in dem Linkkabel gespeichert, so dass Sie keine zusätzliche Software installieren müssen. Nachdem das USB Linkkabel an beide Computer angeschlossen und installiert wurde, wird das Programm automatisch an beiden Computer gestartet. Falls dies nicht der Fall sein sollte, öffnen Sie an beiden Computer den Arbeitsplatz und klicken doppelt auf das Gerät/Laufwerk mit der Bezeichnung EasySuite, dort können Sie dann das Programm auch manuell aufrufen.
Sobald das Programm auf beiden Rechnern gestartet wurde, wird gleichzeitig eine direkte Verbindung hergestellt, dies erkennen Sie daran, dass das Programm EasySuite beide Inhalte der angeschlossenen Rechner darstellt. 2.1 Funktionsbeschreibung des EasySuite Programms: Hinweis: Bedeutung des Begriffs (entfernter Rechner und lokaler Rechner) Also „lokaler Rechner“...
2.1.3 Erklärung der Funktionen Ausschneiden, Kopieren, Einfügen, Löschen, Öffnen und Umbenennen Sie können diese Funktionen verwenden, indem Sie die gewünschte Datei markieren und dann mit der rechten Maustaste das Kontext-Menü öffnen und diese entsprechend auswählen. Alternativ klicken Sie im Hauptmenü die Option „Bearbeiten“...
2.1.5 Erklärung der Funktion Schreibschutz: Mit dieser Funktion können Sie einen der beiden angeschlossenen Computer mit einem Schreibschutz versehen, um ungewolltes Löschen von Dateien zu vermeiden. Bitte beachten Sie, dass dieser Schutz nur bis zur Deaktivierung bzw. Beendigung des Programms aktiv ist! Wollen Sie zum Beispiel den lokalen Rechner als Schreibgeschützt setzen, gehen Sie bitte wie folgt vor: Wählen Sie im Hauptmenu die Option „System“...
2.1.6 Datenaustausch: Methode 1: Wählen Sie die zu übertragende Datei aus und ziehen Sie direkt auf die Zielposition und legen Sie dort ab. Methode 2: Wählen Sie die zu übertragende Datei aus, klicken Sie mit der rechten Maustaste auf die Datei und verwenden dann in dem geöffneten Kontextmenü...
„Beenden/Deaktivieren“. Jetzt können Sie gefahrlos das Linkkabel von Ihrem Computer entfernen! 3. Kontakt- und Supportinformationen: Bei defekten Produkten: Bitte wenden Sie sich bei Produktreklamationen an Ihren Händler oder an die Hama Produktberatung Internet/World Wide Web: Produktunterstützung, Updates oder Produktinformationen bekommen Sie unter www.hama.com...
Edition 200X / Windows Vista / Windows Vista 64-bit. 1. Installation Instructions Before connecting the Hama link cable to your computer, ensure that you have already installed the most up-to-date Service Pack by Microsoft. Hama recommends installing the Service Pack because Microsoft has eliminated a number of fl aws and implemented optimizations that could in certain circumstances affect the speed of the USB link cable.
2. Using the EasySuite Data Transfer Program EasySuite is stored in the link cable so that you do not need to install any additional software. After the USB link cable is connected to and installed on both computers, the program automatically starts on both computers. If this does not happen, open My Computer on both computers and double click the device/drive labelled EasySuite.
The program establishes a direct connection as soon as it is started. When this happens, EasySuite displays the contents of both connected computers. 2.1 Functions of the EasySuite program: Note: Term defi nition (remote computer and local computer) The computer that you are sitting in front of is called the “local host”. This computer is also called the source computer later in this manual.
Local full speed = Source computer transfers data at a max. rate of 12 Mbit/s (USB 1.1 speed). Local high speed = Source computer transfers data at a max. rate of 480 Mbit/s (USB 2.0 speed). Remote full speed = Target computer transfers data at a max.
2.1.3 Explanation of the cut, copy, paste, delete, open and rename functions You can use these functions by selecting the desired fi le, right-clicking it and selecting the corresponding function from the context menu. You can also choose “Edit” from the menu bar to select these functions. 2.1.4 Explanation of the View and Window menus on the menu bar You can use the “View”...
2.1.5 Explanation of the write-protect function: Using this function, you can write-protect one of the two connected computers to prevent fi les from being accidentally deleted. Note that this protection is active only until it is deactivated or until the program is closed.
2.1.6 Data exchange: Method 1: Select the fi le to be transferred and drag and drop it to the target position. Method 2: Select the fi le to be transferred, right-click the fi le and choose the “Copy” command from the opened context menu and then choose “Paste”...
3. Contact and Support Information: If the product is defective: Please contact your dealer or Hama Product Consulting if you have any product claims. Internet / World Wide Web: Product support, updates or product information can be found at www.hama.com Support hotline –...
Page 19
été effectuées par Microsoft; ceci peut avoir un effet sur la vitesse du câble link USB. Etant donné que le câble link USB d´Hama est une solution Plug and Play, il n´est pas nécessaire d´installer préalablement le pilote. Veuillez donc démarrer le système d´exploitation et raccordez le câble link USB à...
2. Utilisation du programme de transmission des données EasySuite Le programme EasySuite est enregistré dans le câble Link, de façon à ce que vous n´ayez pas besoin d´installer de logiciel supplémentaire. Une fois le câble link USB raccordé et installé aux deux micro-ordinateurs, le programme va démarrer automatiquement sur les deux micro-ordinateurs.
Une fois que le programme démarre sur les deux micro-ordinateurs, une liaison directe va s´effectuer simultanément. Vous le reconnaîtrez au fait que le programme EasySuite indique les contenus des deux micro-ordinateurs raccordés 2.1 Description des fonctions du programme EasySuite Information : Signifi...
Local pleine vitesse = L´ordinateur source transmet les données avec max. 12 Mbits/s (vitesse USB 1.1). Local vitesse rapide = L´ordinateur source transmet les données avec max. 480 Mbits/s (vitesse USB 2.0). Distant pleine vitesse = L´ordinateur cible transmet les données avec max. 12 Mbits/s (vitesse USB 1.1). Distant vitesse rapide = L´ordinateur cible transmet les données avec max.
2.1.3 Explication des fonctions couper, copier, insérer, effacer, ouvrir et renommer Vous pouvez utiliser ces fonctions en double-cliquant le fi chier souhaité, en ouvrant le menu de contexte avec le bouton droit de la souris puis en le sélectionnant. Comme option, vous pouvez cliquer dans le menu principal sur l´option „Edition“ afi...
2.1.5 Explication de la fonction protection contre l´écriture : Cette fonction vous permet de protéger contre l´écriture un des deux micro-ordinateurs branchés afi n d´éviter d´effacer des fi chiers par inadvertance. Veuillez observer que cette protection est uniquement active jusqu‘ à la désactivati- on ou fi...
2.1.6 Echange des données : Méthode 1 : Sélectionnez le fi chier à transmettre et déplacez le directement vers la position cible. Méthode 2 : Sélectionnez le fi chier à transmettre, cliquez sur le fi chier avec le bouton droit de la souris et utilisez alors dans le menu contexte ouvert la commande „Copier“...
2.2 Achever le programme EasySuite et enlever le câble link Hama 1. Sélectionnez la commande „Achever“ dans le menu principal „Système“ ou cliquez dans le coin de la fenêtre e haut à droite sur le „bouton de commande X“ pour achever le programme.