Calibrating The Driveright 600 - DAVIS 8126GD User Manual

Calibrating the DriveRight 600

Note: To exit the Settings Screens and view the Data Screens, press and hold MODE until
the Current Readings Screen displays.
Security Code (First Screen)
Calibrating the DriveRight 600
Once the DriveRight 600
that it reports the correct speed, distance, deceleration, and acceleration.
All General Duty and Heavy Duty (# 8126GD and # 8126HD) versions of
DriveRight 600
"Calibrating Using the Speedometer" on page 5), or by using the distance
reading (see "Calibrating Using Distance Readings" on page 7).
The VSS (vehicle speed sensor) version (# 8126VSS) of the DriveRight
600 should be calibrated if the vehicle's VSS pulses per mile is different
E
4
E
CODE
SETTINGS
YEAR
SETTINGS
Year Entry
DAY.MO
SETTINGS SETTINGS
Date Entry
DriveRight 600
is installed in a vehicle, calibrate the device so
E
should be calibrated using the speedometer (see
E
ALARM
SPEED
SETTINGS
Time Entry
Settings Screens
E
E
CLEAR LOG
SETTINGS
Clear Log
SETTINGS
Alarm On/Off
km/h
SETTINGS SETTINGS
Km
Calibration
AM