This manual covers use of the Mounting Pole Kit with the Integrated Sensor Suite (ISS) of the Vantage Pro2 system. The kit can also be used with other Davis Instruments stations, applying the principles shown here with the ISS. Components...
Page 2
Mount the Extension Tube inserted into the top of the extension tube. Make sure the swaged end of the support tube is pointing downward as you secure the ISS (or other station). The ISS comes with U-bolts, washers, and hex nuts for the purpose of mounting it on a pole.
Page 3
Install the Support Tube on the Extension Tube Support Tube (swaged end) Saddle Flat Washers 12" Lag Screws minimum Extension Tube (21" long, no swaged end) 4. Tighten the lag screws until the tube will not slide up or down no matter how hard you try to move it.