Accessing The Camera Using The Upnp Connection (For Windows Xp Only) - Sanyo VA-80LAN Instruction Manual

Option board (network)
Hide thumbs Also See for VA-80LAN:
Table of Contents

Advertisement

Accessing the Camera

■ Accessing the Camera Using the UPnP Connection (for Windows XP only)

When your operating system is Windows XP, you can use the UPnP (Universal Plug and Play)
connection to access the camera.
In the UPnP connection, double-clicking the icon for the camera in the [My Network Places] window will
activate the camera access process. Entering the URL is not required.
● To enable the UPnP component
1 In the [Add or Remove Programs] on the Control
Panel, open [Add/Remove Windows Components].
2 Select "Networking Services" and click [Details].
3 Select the check box for the UPnP component in the
list, and click the [OK] button.
• The UPnP component title in the list should be
either "Universal Plug and Play" or "UPnP User
Interface" depending on your PC.
4 After returning to the [Windows Components
Wizard], click the [Next] button.
5 After the wizard completes, click the [Finish] button.
● Configuring the UPnP connection
In the [OPTION SETTINGS] screen, set the [UPnP]
option to "ON" (see page 25).
• The factory setting value is "ON".
English
● How to access the camera
1 Open the [My Network Places] window.
The icon for the camera detected on the network
appears in the window.
2 Double-click the icon.
This establishes the connection to the camera, and
the authentication dialog appears.
Display name in the [My Network Places]
window:
SANYO Camera - (camera title)
In the (camera title) section above, the title specified for
the camera in [TITLE] field of the [NETWORK
SETTINGS] screen appears.
If the Security Warning screen
appears
Click "Yes" to allow installation of the "ActiveX control",
which is necessary for the voice function.
MEMO:
• If the attempt to install "ActiveX control" fails,
try again after selecting [Tools] → [Internet
Options] → [Security] tab from the Internet
Explorer and changing the security level to
"Medium" or lower.
• If using WindowsXP SP2, the popup blocker
may be displayed.
Click the information bar to display the popup
block permission menu, then click either
"Temporarily Allow Pop-ups" or "Always Allow
Pop-ups from This Site...".
7

Advertisement

Table of Contents
loading

Table of Contents