Davis Instruments DriveRight 600E Manual
Adapter cable
Hide thumbs
Also See for DriveRight 600E:
- Installation and user manual (2 pages) ,
- Installation manual (17 pages)
Advertisement
Quick Links
This manual provides additional instructions necessary to install the DriveRight
600
adapter cable and is intended to be used with one of the DriveRight
E
installation manuals listed below:
• If you are installing DriveRight 600
refer to the "DriveRight Installation Manual" (7395.043).
• If you are installing the DriveRight 600
"DriveRight VSS Installation Guide" (7395.062).
• If you are installing the DriveRight 600
"DriveRight OBD Installation Guide" (7395.198).
Additional Components
The following additional components are included with the DriveRight 600
Insulated Male
Disconnects (2)
(18-22AWG)
D r i v e R i g h t
A
Adapter Cable
In-Line Splice (2)
®
DAP TER
model number 8126GD or 8126HD,
E
model 8126VSS , refer to the
E
model 8126OBD, refer to the
E
(Fuses are
factory installed)
Fuses (2)
(3AG
1-1/4 x 1/4",
.25A,
Slo-Blo)
Butt Splices (3)
(26-22AWG or
24-20AWG)
6 0 0
E
C
ABLE
E
Blue Wire (2)
with Fuseholder (22 AWG)
T-Tap Disconnects (2)
Red (18-22AWG)
Product # 8161
.
Advertisement
Related Manuals for Davis Instruments DriveRight 600E
Summary of Contents for Davis Instruments DriveRight 600E
- Page 1 ® D r i v e R i g h t 6 0 0 DAP TER ABLE This manual provides additional instructions necessary to install the DriveRight adapter cable and is intended to be used with one of the DriveRight installation manuals listed below: •...
- Page 2 Additional Installation Steps In addition to connecting the DriveRight 600 to the DriveRight harness cable, two digital inputs are provided to monitor the on/off state of electrically powered devices. Use the wiring diagram on the next page to install your DriveRight 600 Wiring the Adapter Cable Digital Inputs Two optional digital inputs can be used to monitor the on/off state of lights, brakes or 12 VDC electrical accessories.
-
Page 3: Wiring Diagram
Wiring Diagram Refer to this wiring diagram to connect the DriveRight 600 digital inputs and to connect the Adapter Cable to a DriveRight 600 display, GPS/Wireless Interface Module, or SmartCard Reader.. SmartCard GPS/Wireless Reader Inteface Module Display Adapter Cable Blue Wires with Butt Digital... - Page 4 This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC. The term "IC:" before the radio certification number only signifies that Industry of Canada technical specifications were met. Copyright © 2009 Davis Instruments Corp. All rights reserved. 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. 510-732-9229 • Fax: 510-732-9188...