DriveRight 600
Installation and User's Guide Addendum
The following addendum contains additional information for installing and
using the DriveRight 600
much the same way as the DriveRight 600.
This addendum should be used in conjunction with the DriveRight 600 User's
Guide (7395.192). In addition, this addendum is intended to be used with one
of the DriveRight installation manuals listed below:
• If you are installing DriveRight 600
refer to the DriveRight General-Duty & Heavy Duty Installation Manual
(7395.043).
• If you are installing the DriveRight 600
the DriveRight VSS Installation Guide (7395.062).
• If you are installing DriveRight 600 model number 8126OBD, refer to the
DriveRight OBDII Installation Guide (7395.198).
DriveRight 600
The DriveRight 600
automotive products that allow you to customize your fleet monitoring system.
There are some compatibility limitations in the products family as indicated in
the chart below:
Device
DriveRight 600
#8156
DriveRight 600
E
#8126
*
Requires one #8127 GPS/Wireless Interface Module per vehicle installation.
Note: At time of publication, the Wireless Download Module (#8129) is still under development.
Please contact your DriveRight reseller or Davis Instruments for more information on its
availability.
DriveRight 600
The DriveRight 600
settings contained in the DriveRight 600.
E
device (#8126). The DriveRight 600
E
model number 8126GD or 8126HD,
E
model number 8126VSS, refer to
E
Device Compatibility
E
and DriveRight 600 devices work with an array of
E
GPS Device
SmartCard
On-Board
Reader
Device #
GPS Module
#8104 or #8105
#8157
GPS Module
#8104 or #8105
*
#8128
Device Changes
E
device improves upon or changes certain features and
E
is used in
E
Wireless
Device
#8129 *
#8129 *
1