Davis Instruments Crimp-Type Splice Connector Install Manual

You may use the waterproof crimp-style splice connectors (simple referred to
as splice connectors) to connect any system cables.
T M
OOLS AND
You may need some of the following tools and materials in order to splice
cables. Please be sure you have everything you need before beginning.
Pliers
Wire Stripper or Knife
Cable Clips or Weather-Resistant Cable Ties
T M
IPS ON AKING
For the best connection, note the following suggestions:
Try to place the connection between cables inside a building, underneath an eave,
or in another location similarly shielded from rain.
When securing cables, place a cable clip or tie on each side of the connection
point so the movement of the cables does not cause the connection to pull apart.
It is a good practice to leave an extra length of cable near the connection point in
case future adjustments or repairs are necessary.
U
S I N G
C
R I M P
S
P L I C E
N
ATERIALS EEDED
C
ONNECTIONS
W
A T E R P R O O F
-S
T Y L E
C
O N N E C T O R S
Product #7960