Table of Contents
Advertisement
Motion Sensor Setting (continued)
5
Select "uSENSITIVITY" and press the SET
button.
ALARM SETTING
ALARM IN
MOTION
uAREA
·uSENSITIVITY
·uSENSITIVITY
ZOOM
(SET)
uZOOM TIME
DURATION
ALARM SIGN
RThe "SENSITIVITY" screen appears.
6
Select "<MOVE>" and specify a sensitivity level
(1 –10).
·<MOVE>
RThe greater the number, the lower the responsiveness to
movement becomes.
SET
NO
R
ON
SET
y
SET
y
OFF
5S
5S
OFF
SENSITIVITY
<MOVE>
·
5
<TIME>
1
TEST
SET
y
PRESET
OFF
MENU
BACK
Specifying Alarm Input <ALARM>
7
Select "<TIME>" and specify a detection time of
duration (1 – 60).
RThe greater the number, the lower the detectability against
fast-moving subjects.
■ To confirm the sensitivity of the motion detection
Select "TEST" and press the SET button.
• Make sure that the motion-detected area is properly specified by
placing your hand or other objects in front of the lens.
To finish the test, press the SET button.
8
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
MEMO:
Alarm sign indicates when any moving subject is detected
(See page 32).
30
Advertisement
Table of Contents
