Do It Yourself - GE JDP37 Use And Care Manual

Ge range use and care guide
Hide thumbs Also See for JDP37:
Table of Contents

Advertisement

ADJUST THE OVEN THERMOSTAT—
You may find that your new oven cooks differently
than the one it replaced. We recommend that you
use your new oven for a few weeks to become more
familiar with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot or too cold,
you can adjust the thermostat yourself. If you think
it is too hot, adjust the thermostat to make it cooler. If
you think it is too cool, adjust the thermostat to make
it hotter.
We do not recommend the use of inexpensive
thermometers, such as those found in grocery stores,
to check the temperature setting of your new oven.
These thermometers may vary 20–40 degrees.

DO IT YOURSELF!

To Adjust the Thermostat:
BAKE
2. Select an oven temperature between 500°F. and 550°F.
3. Immediately, before "ON" appears, press and
CLEAR
NOTE: This adjustment will not affect the Broiling
or Self-Cleaning temperature. It will be retained in
memory after a power failure.
1. Press the BAKE pad.
hold the BAKE pad for about 4 seconds. The time
display will change to the oven adjustment display.
4. The oven temperature can be adjusted up
to (+) 35°F. hotter or (–) 35°F. cooler.
Use the INCREASE or DECREASE pad
to select the desired change in the display.
5. When you have made the adjustment,
press the CLEAR/OFF pad to go back to
the time of day display. Use your oven as
OFF
you would normally.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jdp36Jdp39

Table of Contents

Save PDF