Control Panel And Knobs; Metal Parts; Painted Surfaces - GE JBW3 Use And Care & Installation Manual

How to Remove the Storage Drawer or Kick Panel to Clean Under the Range
The area under the range can be reached easily for
cleaning by removing the bottom drawer (on some
models). To remove, pull the drawer out all the way,
tilt up the front and remove it. To replace, insert glides
at the back of the drawer beyond the stop on range
glides. Lift the drawer if necessary to insert easily. Let
the front of the drawer down, then push in to close.

Control Panel and Knobs

Clean up any spills or spatters with a damp cloth.
Remove heavier soil with warm, soapy water.
Clean the control panel with mild liquid
dish detergent and a soft cloth. Rub the control
panel lightly.
CAUTION: Do not use abrasives of any kind on the
control panel. The lettering on models with touch
pads is sensitive to abrasives and pressure.

Painted Surfaces

Painted surfaces include the outside oven door, sides,
control panel and drawer front. Clean these with soap
and water or a vinegar and water solution. Do not use
commercial oven cleaners, cleansing powders, steel
wool or harsh abrasives on any painted surface.
Glass Window
(on some models)
To clean the outside glass window (on some models) and glass surfaces,
a glass cleaner. Rinse and polish with a dry cloth.
use
The oven is vented through an opening under the
right rear surface unit. Never cover the opening with
aluminum foil or any other material. This would
prevent the oven vent from working properly.
To clean under models
front kick panel, remove the
panel by pulling it straight out
at the bottom. To replace the
panel, first hook the top tabs on
and then the bottom tabs.
The control knobs may be removed for easier cleaning.
To remove a knob, pull it straight off the stem. Wash
the knobs in soap and water but do not soak.

Metal Parts

Do not use steel wool, abrasives, ammonia or
commercial oven cleaners. To safely clean surfaces;
wash, rinse and then dry with a soft cloth.
and Glass Surfaces
oven Vent
The oven is vented through an opening at the rear of
the cooktop. Never cover the opening with aluminum
foil or any other material. This would prevent the
oven vent from working properly.
with a
(Glass Cooktop Models)
29