Convection Roasting - GE JBP80 Use And Care & Installation Manual

How to Set Your Oven for Convection Roasting When Using the Temperature Probe
NOTE: For best results when roasting large turkeys
and roasts, we recommend using the probe included
in the convection oven. For the correct placement
of the probe, see the description in the Regular
Roasting section.
convection roasting. The latch is used for self-
cleaning only.
The display will flash "PROBE" and the
oven control will signal if the probe is inserted
into the outlet, but the oven is not programmed
for the probe.
oven door.
3. Press the PROBE pad.
4. Press the INCREASE or
5. Press the CONV. ROAST pad.
(
CO NV.
ROAST
6. Press the INCREASE or
v

CONVECTION ROASTING

(continued)
DECREASE pad until the
desired internal probe
temperature is displayed.
DECREASE pad.
The last oven set
temperature appears in the
display. Continue pressing
temperature is displayed.
When the oven starts to heat, the words "CONV
ON" and the roasting temperature you set will be in
the display.
After a few seconds, the words "LO PROBE" will
replace the roasting temperature in the display.
After the internal temperature of the meat reaches
shown in the display.
o
7. When internal temperature of meat
reaches the number you have set, the
CLEAR
probe and the oven turn off and the
OFF
oven control signals. To stop the
signal, press the CLEAR/OFF pad.
Use hot pads to remove the probe from
the food. Do not use tongs to pull on
it—they might damage it.
CAUTION: To prevent possible burns, do not
unplug the probe from the oven outlet until the oven
has cooled. Do not store the probe in the oven.
NOTE:
If the probe is removed from the food before the
final temperature is reached, a tone will sound and
the display will flash until the probe is removed
from the oven.
You will hear a fan while cooking with this feature.
The fan will stop when the door is opened but the
heat will not turn off.
. You can use the timer even though you cannot use
timed oven operations.
To change the oven temperature during the
Convection Roast cycle, press the CONV. ROAST
pad and then press the INCREASE or DECREASE
pad to get the new desired temperature.