Saeco Primea Ring Operation And Maintenance Manual page 41

THOROUGH MAINTENANCE OF THE CAPPUCCINATORE
Thoroughly wash the cappuccinatore at least once a week.
The components should be hand-washed with household detergents.
1
Remove the cappuccinatore.
4
Remove the cap from the lower
part.
O-RING REPLACEMENT
When the upper and lower parts of the cappuccinatore move too freely, replace the O-ring with the ones
supplied.
1
Remove the O-ring with a pointy
object.
2
Separate the upper part of the
cappuccinatore from the lower
part.
5
Wash all components. Make sure
that the hole is clean and
unobstructed.
2
Insert the new O-ring pressing it
delicately.
3
Remove the regulator.
6
Reassemble the components and
install the cappuccinatore in the
container.
3
Assemble the upper and lower
part of the cappuccinatore.
39